NuAire ES-LCD Installation & Operating Instructions Manual Download Page 5

The example below shows the fan will run at speed 8

between 7:30am and 6pm every Monday to Friday inclusive.

The cooling will be selected if the temperature at the ES-TEMP

is above 25

o

C.

Note that program B is used in this example. It is 

recommended that functions with opposite effect on 

operation, e.g. heating and cooling are separated into 

2 programs for clarity and ease of programming.

If the thermostat option is set to ventilation and the 

function includes heating or cooling, by default the 

heating/cooling will also be controlled by the thermostat.

The example below shows the fan will run at speed 5 between

midnight and 6am every day if the temperature at the 

ES-TEMP is greater than 22

o

C. Such a program could be

used to provide night time free cooling during the summer.

If a program period is no longer needed, scroll the screen to

display this period and press ‘Delete’ to remove that period

from the program.

To copy a program period into another, scroll the screen to 

display this period then press ‘Copy’ to copy the data. 

Scroll screen to the program period to be overwritten and

press ‘Paste’ to paste the data. Edit the program as 

necessary and press ‘Save’ to save the new settings.

Press ‘Exit’ to exit this menu.

If the programmed periods are overlapping; the following rule

will apply. The example shows the starting time for each 

4 hour block (for illustration purpose only).

The figure above shows the type of overlapped programming

that could occur and is dealt with by using the starting time

as controlling factor.

The program will produce the following results:

Period 2 will run from Mon 00:00 to Mon 12:00

Period 1 will run from Mon 12:00 to 00:00

Period 3 will run from Tue 00:00 to Tue 08:00

Period 4 will run from Tue 08:00 to Tue 16:00

Period 5 will run from Tue 16:00 to Tue 20:00

Period 4 will run again from Tue 20:00 to Wed 00:00

(continued on page 5).

5

Installation and Operating Instructions

ES-LCD User Control

Prog A 
Period 1

Prog A 
Period 2

Prog A 
Period 3

Prog A 
Period 4

Prog A
Period 5

11. 05. 17. Leaflet Number 671415

Mon Mon

Mon

Mon

Mon

Mon  Tue

Tue

Tue

Tue  Tue  Tue

Wed

00:00

04:00 08:00

12:00

16:00

20:00

00:00

04:00

08:00

12:00

16:00

20.00

00:00

Summary of Contents for ES-LCD









Reviews: