TEMP
Connection t
o
Remo
te
F
a
il
Indicat
or Ref:
MRXBO
X95LH-RFI
ECOSMART NET
24V 0V SW
F
AN 1
F
AN 2
1 2 3
CUSTOMER SUPPLY
THERMOSTAT
WAX ACTUATOR
FOR DAMPER
5
Leaflet Number 671597 January 2013
Installation and Maintenance
XBOXER-MICRO Mechanical Ventilation with Heat Recovery & Summer Bypass
Unit
wiring
Customer
wiring
E
N
L
3 Pole Isolator
(supplied by others)
Single Pole Volt
Free Switch
(supplied by others)
Mains
230V~50Hz
Supply
Disconnection from the supply
mains must be incorporated
within the fixed wiring in
accordance with the wiring
regulations and shall have a
minimum contact separation
of 3mm.
1
2
Customer wiring
Figure 8.
For good EMC engineering practice, any sensor cables
or switched live cables should not be
placed within 50mm of other cables or on the same
metal cable tray as other cables.
Figure 7.
5.0 Electrical Connection
Please note: the electrical connection of the unit must be be carried
out by a qualified electrician.
The unit is supplied with a flexible cord for connection to the mains
supply.
Electrical details:-
Voltage:
240V 1ph 50Hz
Consumption: 1.3
Amp
Fuse rating:
3 Amp
NOTE This unit must be earthed.
The three core cable from the mains power supply should be
connected to a fixed wiring installation, via a fused isolator, in
accordance with current IEE wiring regulations.
Note: Wiring for
reference purposes
only, as the
connections above
are factory fitted.
