SERVICE AND REPLACEMENT GUIDE
SUB
–123P OWNER'S MANUAL
NU-VU
®
FOOD SERVICE SYSTEMS
MENOMINEE, MICHIGAN 49858-1029
page
24
Sales Fax (906) 863-
5889 ♦ Service Fax (906) 863-6322
(906) 863-4401
H. A quality sealant will be dry to the touch and tack-free in one to two hours after application.
However, it will not be completely cured until six to eight hours later. We recommend that you
wait until after your sealant is completely cured before using your Oven.
Replacing the Proofer Door Gasket - -
A. Remove all pieces of the old Gasket. Thoroughly clean the Door frame in preparation for the new
installation. Remove any old sealant, bits of Gasket and baked-on deposits.
B. The replacement Proofer Door Gasket is supplied as a single formed piece of low-temperature
material. This material is not suited for use in a high-temperature application, and should never be
used on an Oven Door.
C. Place the formed Gasket over the slot in the face of the Door frame and press it firmly into place.
A small roller tool will aid in fully seating the Gasket in the mounting slot.
D. The replacement Gasket requires nothing further. You may begin using your Proofer as soon as
the Gasket has been installed.
WARNING: SOME SEALANTS GIVE OFF ACIDIC FUMES AS THEY CURE. THESE
FUMES MAY CAUSE IRRITATION TO THE EYES AND/OR NASAL PASSAGES. USE
CAUTION WHEN OPENING YOUR UNIT AFTER WAITING FOR ANY FRESH SEALANT
TO SET UP AND CURE!
