Nu-Air Elimiator 80, Installation, Operation And Care Manual

Page: 2 / 4

Congratulations on purchasing the Eliminator 80 by Nu-Air Ventilation Systems Inc.: the most
practical way to deal with stale air, odours and excess humidity in damp basements.
CONTENTS:
This package contains all the necessary hardware to install the Eliminator 80. You should have received:

The Eliminator 80 (1)

Height-adjustment screws (2)

6” Outside hood (1)

6” flexible insulated ducting (4 ft/1.22 m)

Self-adhesive gasket (20 ft/6 m)
REQUIRED TOOLS & MATERIALS:
To install the Eliminator 80 you will need the following tools.
 Reciprocating, jig saw or hole saw
 Caulking, Caulking gun
 Flexible caulking

Duct tape

Pan head wood screws and washers

Sheet rock anchors (for finished areas)

Drill, tape measure, screwdriver, utility knife