background image

Make sure that pet animals do not bite on the product
It could cause ignition, explosion, generation of heat and leakage of liquid of the 
built-in battery.

In case anomalies such as generation of heat are experienced, stop using the product 
immediately and keep it away from body.
It could cause skin burns etc.

CAUTION

DO NOT use the product when it is damaged..
It could cause fires, skin burns, injuries and electric shocks.

DO NOT throw away the product together with regular garbage.
It could cause ignition and environmental destruction. 

When the product is used in a car, check with the manufacture or sellers about 
the influence of radio waves before using it.
Rarely, depending on models of cars, the product could have a negative impact on 
the car-mount electronic devices, in which case, stop using it immediately. 

In case there is leakage etc. from the inside of the built-in battery, do not put it 
on the face, hands, etc.
It could cause blindness and damage on the skin.
In case liquid etc. gets in the eyes or mouth, or adheres to skin or clothes, wash it 
off with clean water immediately.
Further, in case the liquid etc. gets in the eyes or mouth, wash it off with clean 
water and consult with a doctor immediately.

Depending on the physical dispositions and conditions of the customer, itchiness, 
skin rashes, eczema, etc. could occur. In case of anomaly, stop using it immediately 
and consult with a doctor.
See P.9 ’List of materials’ for materials used in different parts of the product.

Summary of Contents for hitoe



















Reviews: