NTT docomo hitoe, Instruction Manual

Page: 11 / 18

The product has the IPX5
※
1 and IPX7
※
2waterproof performance when the cover of the
terminal for external connection is tightly closed without openings or gaps.
※
1.IPX5 means that functions are protected from water jets created with a water nozzle of
the inside diameter of 6.3mm with 12.5L/min. of water coming from the distance of approx.
3m for at least 3 minutes from any direction.
※
2.IPX7 means that functions are protected when products are dropped in 1 m-deep
normal temperature, tap and still water gently and picked up in approx. 30 min.
(Note) They do not guarantee all the operations in all the conditions. Therefore, in order to
prevent entering of water and foreign substances, and use the product safely, read the
manual carefully before use.
■
Important items to check before use

Tightly close the cover for the terminal for external connection before use. Even a small
gap made by small objects (e.g. thin fiber, hair, sand, etc.) could cause water and dust to
enter the product.
When closing the cover for the terminal for external connection, check that dust and dirt
are not clinging to the area around the cover (especially to the packing).

Check that the cover for the terminal for external connection is tightly closed without
openings or gaps. If it is not tightly closed, water may enter.
■
Precautions

Do not wash in a washing machine or supersonic washing machine.

Never charge when the product is wet.

Do not leave the product with drops of water on the product.

Do not drop or inflict an impact on the product.

Do not dip the product in hot water, use it in a sauna or blow a hair dryer’s hot air on it.

Do not directly splash water stronger than the specification (P.14) on the product or sink
it in water.

Do not directly put the product on a sandy beach etc.

Do not open/close the cover for the terminal for external connection with putting gloves
etc. on.
Small dust may cling to the joining surface of the packing.

When wiping off water with dry and clean cloth, make sure that fiber does not cling to
the packing of the cover for the terminal for external connection.

Do not remove the packing. Further, do not insert items with sharp edge to the cover for
the terminal for external connection.
The packing becomes damaged and causes water to enter.
Caution