18
Befo
re Usin
g th
e FOMA T
e
rmin
al
UIM (F
OMA Card)
b
Insert the UIM until the Eject Slider slides
in place
• Push the terminal in until the Eject Slider reaches the
above position.
Removing
a
Slide the Eject Slider in the direction of
the arrow
b
Remove the UIM from the UIM Card
Opening
•
Hold the UIM with your fingers and follow the operation
procedure to insert/remove the card. Do not use
excessive force to insert/remove the UIM into avoid
damaging the card.
•
Do not touch or damage the IC portion for the UIM.
•
Do not misplace the UIM.
UIM PINs
You can set two PIN codes (Personal
Identification Number), PIN1 code and PIN2
code, for the UIM. The default settings for the
PIN1 and PIN2 codes are “0000.”
The PIN1 code is a 4- to 8-digit security code to
be entered every time the FOMA terminal is
turned on for user verification to prevent any
unauthorized use by others.
The PIN2 code is a 4- to 8-digit security code to
be used when using or requesting the issue of a
user certificate (when using FirstPass).
■
Changing the PIN1 code
You can change the PIN1 code to any number.
To prevent any unauthorized use by third parties,
change it to your own number.
If you improperly enter the PIN1 code 3 times in a
row, further entry is locked automatically (PIN
lock), so be sure to keep a separate note of the
numbers you set.
• “Entering a PIN1 Code/Changing the PIN1 Code”
→
P41
■
PUK (PIN Unblocking Key)
The PUK is the number used to unblock the PIN1
code. You are notified of your PUK when you
purchase your FOMA terminal. Entering the PUK
(8-digit) unblocks the PIN lock.
If you improperly enter the PUK 10 times in a row,
the UIM locks automatically, so be sure to keep a
separate note of the number. Contact a DoCoMo
shop if you forget the PUK or you cannot unblock
the PIN lock.
• “Unlocking a Locked PIN”
→
P42
Eject Slider
Eject Slider
If your UIM is set to require a PIN1 code, data
communication cannot be performed until the
PIN1 is entered. Start the M2501 HIGH-SPEED
Utility and verify the PIN1 code, or set not to
verify the PIN1 code in advance (P41) if you
want to avoid this step.
Start up the M2501 HIGH-SPEED Utility.
The PIN1 code Verification screen appears.
Enter PIN1 code
OK
Incorrect entry 3 times in a row
The M2501 HIGH-SPEED
Utility and data
communication are available
Enter PUK
OK
Incorrect entry 10 times in a row
You can set a new
PIN1 code
Contact a DoCoMo shop
