8
Contents/Precautions
SH-03G_E_01.fm
[8/12]
TV/Mobacas antenna cable SH01
SH-03G is waterproof, however, do not allow water to get
inside the handset and do not allow accessories or optional
parts to get wet.
The adapter, docomo nano UIM card and TV/Mobacas antenna cable
are not waterproof. Do not use in humid or steamy areas such as
bathrooms and avoid exposing to rain and other forms of moisture. If
they are carried close to the skin, perspiration may cause internal
components to corrode and result in malfunction. Note that if a
problem is found to be due to moisture, the handset and parts are not
covered by warranty and in some cases may be irreparable. Even
when repairs are possible, repair charges will be incurred, since the
damage is not covered by warranty.
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
・
Forceful rubbing of the display with a dry cloth etc. may scratch its
surface.
・
Water drops, dirt, etc. left on the display may cause stains to form
on its surface.
・
Never use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
Occasionally clean terminals with a dry cotton swab etc.
Dirty terminals may result in poor connections and loss of power or
insufficient battery charge. Keep the terminals clean with a dry cotton
swab etc.
Be careful with the terminals while cleaning them.
Do not place the equipment near an air conditioning vent.
Condensation formed due to rapid changes in temperature may
cause internal corrosion and lead to a malfunction.
Do not apply excessive force on the handset etc. when
using it.
Carrying the equipment in a tightly packed bag or sitting on it put in
your pocket may cause damage to the display, internal components,
etc. or result in a malfunction.
Keeping an external connector device plugged into the external
connector terminal or earphone/microphone terminal may cause
damage or a malfunction.
Do not rub or scratch the display with metal etc.
May scratch it and cause a malfunction or damage.
Read the respective user's guides supplied with supported
optional parts carefully.
Do not forcefully press the surface of the touch panel or
operate with a pointed object such as a fingernail, ballpoint
pen or pin.
May damage the touch panel.
Avoid using the handset in extremely high or low
temperatures.
Use the handset within the range of a temperature between 5°C and
35°C and a humidity between 45% and 85%.
Using the handset close to land-line phones, TVs, radios,
etc. may have harmful effects on the operation of such
equipment. Move as far away as possible from such items
before use.
Keep a separate memo noting information stored on the
handset.
DOCOMO shall not be liable for any loss of content.
Do not drop or otherwise subject the handset to severe
impact.
May cause a malfunction or damage.
When connecting an external connector device to the
external connector terminal or earphone/microphone
terminal, do not put it in obliquely and do not pull it while it
is plugged in.
May cause a malfunction or damage.
The handset becomes warm during use or charging but this
is not a malfunction.
Do not leave the camera in direct sunlight.
May cause discoloration or burn-in of pixels.
Use the handset with the docomo nano UIM card/microSD
Card slot cover closed.
Dust, water, etc. may get inside and cause a malfunction.
docomo nano UIM card/microSD
Card slot cover
PC resin/UV coating for
surface
Gasket of docomo nano UIM
card/microSD Card slot cover
Silicon rubber
Sticker indicating position for
inserting docomo nano UIM card/
microSD Card
PET resin
Tray for inserting docomo nano
UIM card
POM resin
IMEI plate
PET resin
Screw
SWCH16A/Plating
Power key
PC resin/Deposition
Side key
PC resin/Deposition
Camera panel
Reinforced glass/Printing on
the back
Decoration of camera
Aluminum/Anodizing
Fingerprint sensor
Epoxy resin/UV coating for
surface
Decoration of fingerprint sensor
Handset color White: SUS/Cr
deposition
Handset color Black: SUS/Ti
deposition
Handset color Red: SUS/TiAl
deposition
Mobile light
PC resin
External connector terminal
SUS/Sn plating, Copper alloy/
Gold plating
Strap pin
PA resin
Part
Material/Surface treatment
Earphone/Microphone terminal
(Outer section)
Olefin system elastomer
Earphone/Microphone terminal
(Middle section)
PBT resin
Earphone/Microphone terminal
(Inner section)
PA resin
Earphone/Microphone terminal
(Metal section)
Ni base, Phosphor bronze/
Gold plating
Cord
Styrene system elastomer
Connector
Olefin system elastomer
Connector (Connection)
POM resin
Plug (Metal section)
Ni base, Brass/Gold plating
Plug (Resin section)
PP resin
Handling precautions
General notes
Part
Material/Surface treatment
Notes about the handset
SH-03G_E.book 8 ページ 2015年4月6日 月曜日 午前10時30分