4. How To Use
4-1. Checking the remaining thread
Check the remaining amount of thread from the
confirmation window on the side of the body before use.
When the thread is little, the yellow stop tape will be
visible. At that time stop using the cleaner and prepare
another cleaner. If used up to the limit, the adhesive on
the stop tape may adhere to the connector.
4-2. How to clean the optical connector inside the device (in the adapter)
①
Remove the attachment and insert the guide straight into the adapter.
②
Lightly push the cleaner in until the body stops. Cleaning is completed with a
"click" sound.
4-3. How to clean the single optical connector (plug)
①
Remove the cap of the attachment, and insert the cleaner straight into the ferrule
of the connector (plug) so that the ferrule enters the tip hole.
②
Lightly push cleaner in until the body stops. Cleaning is completed with a "click"
sound.
stop tape
Adapter
Guide
Straight insertion
Push lightly
Connector (plug)
Cap
Straight insertion
Push lightly
Thread remaining
confirmation window
