NTI XTENDEX 300 Foot DVI Video and IR Extender
6
INFRARED CONTROL
The ST-C6DVI-IR-300 includes ports for connecting an infrared emitter and receiver (included) to work in conjunction with the IR
remote control used to operate the video source. Connect the receiver to the “IR IN” port on the Remote Unit and the emitter to
the “IR OUT” port on the Local unit. Position the end of the receiver such that the signal from the remote control can easily reach
the IR sensor. Position the end of the emitter such that the extended signal can be sent to the video source.
Figure 5- Connect IR Emitter and Receiver
3.5MM Mono Plug
IR Emitter
3.5MM Stereo Plug
IR Receiver
IR-RCVR-3
IR-EMTR-3
Note: The IR Emitter and Receiver work within a frequency range of 33-40kHz. Check the
specifications for the device you are extending to make sure the XTENDEX will work with it.
