7
INFRARED CONTROL
The infrared remote control can be used to change connections or disconnect video and
audio altogether.
2/4 Port Models
Press “Power Off” to blank the video to the DVI OUT port and mute the AUDIO OUT signal.
Press “Power On” to restore video and audio connections.
Press “Mute” to disrupt the AUDIO OUT signal, and press any button in the Audio column to
restore audio, or press “Mute” again.
Press any button in the Video or Audio column to switch the respective input to the output.
Video and audio inputs will change independently.
8 Port Models
Use the upper buttons to make connection to a video input.
Use the lower buttons to make connection to an audio input, independent
of the video input.
Use the Sync button (press to toggle On/Off) to force the switch to synchronize
video and audio changes to happen together.
Use the Volume Adjust button (blank white button) to control the audio volume.
Press repeatedly to increase to maximum and then decrease.