6
SWITCH CONTROL
The VIDMUX can be controlled using either the
“AV Sync” button on the top (SE-DVI-2/4A models only)
“Source Select” button on the front (SE-DVI-2/4ARS models only)
“Audio” and “Video” front panel buttons (SE-DVI-8ARS model only)
Infrared Remote Control
RS232 Control (SE-DVI-2/4/8ARS models only)
PUSH BUTTON CONTROL
2- and 4-Port Models
The push button on the VIDMUX (“AV Sync” or “Source Select” depending upon your model) will change the connected input to
the next consecutive input (video and audio together) with each press. To switch video or audio separately, use the infrared
control.
8-Port
The push buttons on the front of the SE-DVI-8ARS (“Audio” or “Video”) enable you to switch the video and audio independently.
When switching audio, the microphone and speaker ports will switch together. To switch video and audio together, press the
“Sync” button (the Sync LED will illuminate). The buttons associated with the active ports will illuminate. To power cycle the
SE-DVI-8ARS, press the “Reset” button.
“AV Sync”
Button
“Source Select”
Button
SE-DVI-4ARS
Front View
SE-DVI-2A
Front View
SE-DVI-8ARS
Front and Rear View
“Audio” and
“Video” Buttons