NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
33
Figure 27- Last confirmation before firmware update
7.
Using the terminal program, send the binary firmware file using “
1K Xmodem
” protocol.
Figure 28- File transfer in progress
8.
After successful transmission the SERIMUX will automatically restart after few seconds. If not, either power down the
RACKMUX and power it back ON (or just press the “Sytem Reset” button (pg.30)) and press [
Enter
[.
If the firmware update failed or was interrupted for any reason, power cycle the RACKMUX (or press the “Sytem Reset” button
(pg.30)) and repeat the procedure beginning at step 4.
