RJ diagram connector
The connector RJ 11 of the printer the pins that feed
the coil are, pin 4 (+ 24v) and pin 2 (Signal opening
drawer 1) for the normal drawers. Drawer layout:
PIN
SEÑAL
DESCRIPCIÓN
1
GNDsignal
-
2
Drawer opening signal 1
Input
3
Signal status (open / closed)
Output
4
+ 24V
-
5
Drawer opening signal 1
Input
6
GND signal
-
Dismantle drawer
Remove the compartment for bills and coins. Then
remove the drawer following the lower drawing.
Check that there is nothing inside the drawer or in
the guides that makes it difficult to move the
drawer.
Safety lock
The drawer has a lock with 3 positions to perform 3
different functions:
1.
Position (1) closed without electronic opening. In
this position the drawer cannot be opened in
any way since the lock blocks it.
2.
Position (2) closed with electronic opening. In
this position, the opening of the drawer can be
controlled electronically.
3.
Position (3,4) manual opening with key. Turning
the key to position 3 does nothing but from
position 3 to 4 it opens the drawer. When
releasing the key returns to position 2.
Quick Guide
Cash Drawer
NX-HQ-410
