NTI ETH-2X1 Installation And Operation Manual Download Page 11

NTI Manual Ethernet Switch

8

TROUBLESHOOTING

Each and every piece of every product produced by Network Technologies Inc is 100% tested to exacting specifications.   We
make every effort to insure trouble-free installation and operation of our products.   If problems are encountered while installing
this product, please look over the troubleshooting chart below.  If an answer is not found in the chart, check the FAQs (Frequently
Asked Questions) at our website at 

http://www.nti1.com

  or contact NTI directly for help at  800-742-8324 (800-RGB-TECH)  in US

& Canada  or  330-562-7070 (worldwide).    We will be happy to assist in any way we can.

Problem

Cause

Solution

ETH-4X1 power LED does not
illuminate

 

Power supply is not connected

       or plugged-in.

 

Make sure outlet is live and AC adapter is

      plugged in.  Also make sure power jack is
      fully connected to the switch.

NETWORKS(s) will not
communicate with DEVICE(s)

 Poor 

Connection

 

Wrong ethernet cable

 

Make sure all ethernet cables are inserted
completely, snapping into RJ45 sockets

 

Cable must be CAT 5 ethernet-  straight
through type,   NOT crossed

MODEL :               ETH-4X1

                              ETH-2X1

                              ETH-4X1-RS

                              ETH-2X1-RS

Man048   Rev. 1/13/05

SERIAL NO:                  

DATE: __                       

INSPECTED BY:                       

Summary of Contents for ETH-2X1












Reviews: