3
Restoring the default configuration of the ENVIROMUX
7. As the ENVIROMUX restarts, it will restore defaults (as shown in image above) and then present the ENVIROMUX login screen (below).
Text Menu Login Screen
Page 1: ...t HyperTerminal We cannot confirm whether other terminal programs will give satisfactory results 1 Connect one end of a CAT5 patch cable supplied to the port labeled RS232 on the rear of the E 16D or front of the E 5D Plug the other end of the CAT5 cable into an RJ45 to DB9F adapter supplied and connect the adapter to the RS232 port on the control terminal Connect a terminal for direct RS232 seria...
Page 2: ...ou fail to press this key in time the system will continue booting and you will have to power OFF the ENVIROMUX and start over Erase the configuration of the ENVIROMUX 4 At the SEMS 16 prompt type SEMS 16 nand erase config 5 Press Enter key The ENVIROMUX will erase all configuration settings and restore the ENVIROMUX to factory default settings ALL USER CONFIGURATION AND SENSOR CONFIGURATION SETTI...
Page 3: ... Restoring the default configuration of the ENVIROMUX 7 As the ENVIROMUX restarts it will restore defaults as shown in image above and then present the ENVIROMUX login screen below Text Menu Login Screen ...
Page 4: ...ronment monitor 16 html to change the network settings back to what they were or you can login to the text menu below using the default administrative user root and password nti From the text menu to change the network settings enter 4 then 1 to get to the network configuration menu Enter your settings Be sure to Tab to the Save and press Enter before exiting the menu ...
