1
E-xD: RESTORE DEFAULTS VIA RS232
This procedure is provided to enable the administrator to restore defaults to the E-5D\16D using the “RS232” port.
Note: This procedure has been tested to work properly using Microsoft
®
HyperTerminal. We cannot confirm whether
other terminal programs will give satisfactory results.
1.Connect one end of a CAT5 patch cable (supplied) to the port labeled “RS232” on the rear of the E-16D (or front of the E-5D).
Plug the other end of the CAT5 cable into an RJ45-to-DB9F adapter (supplied), and connect the adapter to the RS232 port on the
control terminal.
Connect a terminal for direct RS232 serial communication
