Reversible vibratory plates
Operating instructions
side 21
edition 06/2009
9. The travel control lever will automatically move forward and the machine will start travelling
forward.
10. Pull the travel control lever backwards to make the machine travel backwards.
4.2
HATZ 1B20 and 1B30 Diesel Engines (Starting with a Stranded Wire)
1.
Set the throttle control lever (see 4.2.1) into the idle-run position (a little bit above its extreme
position).
2.
Pull the handle of the starting wire a little until you feel a resistance. Then pull the wire swiftly.
Do not release the handle quickly but hold it by hand on its reverse movement.
3.
Let the engine heat up sufficiently before work.
4.
Put the throttle control lever into the "full throttle" position (1). At approximately 1,700 r.p.m.,
the centrifugal clutch is automatically activated and the machine starts to vibrate.
Travel Forward
1
Travel Backward
