Reversible vibratory plates
Operating instructions
side 18
edition 06/2009
Remove the foam collar (3).
Check the paper filter element to make sure that it is clean and in good order. Clean the paper filter
element carefully blowing it off with compressed air from inside. Replace if too dirty.
Wash the foam collar in soap water, never in any solvent!!! Replace if damaged.
Replace all parts carefully.
Never operate the engine with the air filter removed. Dust and dirt taken inside the engine through the
carburettor would cause its rapid damage.
Air filter for HATZ 1B20 engines:
Unscrew the plastic wing nut (1) and remove the plastic air filter cover (2).
Unscrew the nut (1) and remove the paper filter element (2).
1
2
3
1
2
1
2
