UME-TSG02-07/21
www.newtableconcept.com
Page 4
3. PARTS DESCRIPTIONS
The table is made up of three main components, which are:
the stainless-steel rails to be fixed to the wall
the variable parallelogram metal structure to be connected to the sliders of the rails
the tabletop to be screwed over the parallelogram metal structure (Fig. 2).
Fig. 2
The four sides of the parallelogram metal structure are formed by the following parts (Fig. 3):
the sliding carriage is attached to the four sliders. It runs up and down 12 mm from the wall
the frame holds the tabletop
the main carriage on wheels
the pair of tie rods.
Fig. 3
The parallelogram metal structure hosts three components:
the counterweight, which is made of metal plates, is located at the end of the frame opposite the
rails (it is not present in short tables)
the piston is located between the main carriage and the frame
the table lock mechanism is located on the right side of the sliding carriage.
