IPCAM User Manual
22
Picture 33
·
If
d
omain name
was input
, but IP camera
will not open
in the browser, such
is an example down below
·
Please open the device
UI
and check status of IP camera in the local area network, confirm whether
DDNS is successful or not.
·
You need to set
port mapping function successfully
, to check whether the router UPNP function
is available, if It was unavailable, please make it available refer to the routers user manual!
If you use TPLINK router, please refer to these instructions
.
·
Through the upnp automatic mapping port
of
the network: input router IP address in
to
the browser
(such as "http://192.168.1.1/ >,
usually a
router
s
IP address
es
are written on paper label
s
on the
router hous
ing
---- please set according to your own IP address), open the routers page"
Port
forward rules "> >"
