Front Panel Control [D48X only]:
To access an input or output channel, simply press the corresponding Edit button.
Use the D-pad buttons to navigate the settings:
Up and Down to scroll through available parameters
Left and Right to scroll through / edit the current parameter
Use the rotary encoder to edit. The centre button acts as an Enter button to confirm any changes you may have
made.
Each channel has its own local mute button – simply press a mute button to mute or un-mute the channel.
Meters:
Input: 6-segment input LED meters show input level (pre-input gain and filters) respective to the maximum
allowable input level of +22dB.
Output: 6-segment output LED meters show the output level respective to the output limiter threshold. The +4 red
LED denotes 4dB in to limiting.
Rear Panel Audio Connection:
4 input / 8 output fully balanced analogue XLRs – AES digital connections are included, but must be selected from
within D-Net on the particular device’s system tab and Input/Output Mode.
