To get the most out of your NST Audio D48X and ID48X, please download the D-Net computer control software:
www.nstaudio.com
Computer Connection:
To interface with the unit, simply attach a standard CAT5 Ethernet cable to the Ethernet 1 port on the rear of the
unit – this can be done as a single direct connection to the computer or through a hub / switch.
There is no need to configure an interface or assign an ID number etc. If a DHCP server is available on the Ethernet
network, the D-Net software will automatically locate and connect to any D48X and ID48X devices on the system.
To connect to multiple devices simultaneously, either daisy-chain from Ethernet port 2 to the following device’s
port 1 and so on, or use a suitable Ethernet switch / hub and quality CAT5 patch cables and connect
each
unit to
the switch
directly
.
Alternately, a USB C cable can be connected to the front panel socket of an individual unit for easy access – this
connection will also pick-up any networked devices connected via the Ethernet ports on the rear panel.
Open D-Net and press the online
button
Connected devices will appear in the ‘virtual rack’ on the left in D-Net. Double click
on the device in the rack to open its control panel.
To create a new crossover setup, go to the “System” page on the control panel and
click on the “Routing Wizard” button. This will give a choice of standard and custom
crossover setups:
