VAC (1) & PUMP (2) SWITCHES:
These switches are powered by cord #1 (4" red band).
Switches are on when illuminated.
CARPET/UPHOLSTERY SWITCH (3):
This switch is also powered by cord #1 (4" red band).
The carpet setting (down position) is high pressure
(approximately 300PSI). The upholstery setting (up
position) is low pressure (approximately 50PSI with a
K1 or V2 spray tip). NOTE: Switch does not illuminate.
BYPASS SWITCH (4):
Turning on this switch (switch illuminates when on)
bypasses the circuit locator. See previous page for
explanation of the bypass system.
GREEN CIRCUIT LOCATOR LIGHT (5):
When this light is illuminated, it confirms that the
machine is on two separate circuits. See previous
page for additional information on the circuit locator.
HEAT MODE LIGHT (6):
This light will only illuminate when the heater is heating
and will turn off when it reaches operating temperature.
SWITCH PLATE
DOME (RECOVERY TANK)
VAC INTAKE
PRIMING HOSE IN
POSITION FOR PRIMING
DRAIN VALVE
LATCH (2)
LIFT HANDLE
4" CASTORS
VENT
8" WHEELS
HOLDING TANK LID
PRESSURE GAUGE
(1)
(2)
(3)
(4)
(5)
(6)
(Not part of 240V machine)
(Not part of 240V machine)
https://harrissupplyind.com - To Order Parts Call 608-268-8080
