Page 9 of 12
Ill. 2: Cleaning the collet chuck
Ill. 3: Suction sleeve
Disinfection, cleaning and storing the tools:
Tools made of tool steel are subject to a risk of corrosion. Please only use hot air (180°C) or cleaning-
disinfectant agents with corrosion protection for sterilising the tool for this reason.
Dry the tools immediately after cleaning them and store them in a sterile manner.
Maintenance
It is recommended that the PODIAVAC is serviced in accordance with the intervals specified (see
below). Maintenance and repair may only be carried out by authorised skilled staff of the
manufacturer.
Unauthorised persons are not permitted to open the device under any circumstances.
In case of changes and repairs by staff not authorised to that end, any warranty or liability on the part
of the manufacturer ceases to apply.
During the regular maintenance of the device an examination according to DIN VDE 0702/0751 has to
be carried out in addition to a visual inspection and a performance test.
Wearing parts have to be replaced after prolonged use. However, these are not covered by the
warranty provisions or they are only covered by these to a restricted degree.
Suction sleeve
Collet chuck
Marking
Hose mounting
Motor bearing
