Page 3 of 12
Introduction
We are pleased that you have chosen our product
PODIAVAC
.
In order to use the device in a proper and safe manner it is important that you read these operating
instructions carefully prior using the device for the first time.
PODIAVAC is a compact foot care device for the dry technology which is based on state-of-the-art
technology. It is used for treatments which can be employed in foot care or pedicure/ manicure.
Our device is equipped with an powerful high-speed, ergonomically shaped hand-piece. The low-
vibration precision micro-motor in the hand-piece facilitates convenient operation. A safe and secure
exchange of the grinder is made possible by means of an automatic chuck on the hand-piece.
The brushless high-speed hand-piece motor and an suction system integrated into the hand-piece
ensure excellent conditions for pain-free and hygienic treatment.
A dust bag made of micro-fibre material ensures a maximum of safety.
All functions of the device are displayed on the front panel. In this way you can simply check the set
speed, the rotating speed of the grinder and the suction capacity.
With the help of the optional foot switch you have the possibility of keeping your hands free for your
work.
Important notes
Attention!
Please check after unpacking whether the device is complete and has not been
damaged during transport. If there is any doubt, you should immediately contact our customer
service.
Please read the following safety instructions carefully.
Adequate ventilation of the device is necessary to prevent inside the unit too much heat.
Imagine, the PODIAVAC should not be placed in the vicinity of heat sources, such as e.g. radiators or
air vents.
The ventilation slots on the device must not be blocked and the device must not be covered or built
in.
Wait until the device has adjusted to the ambient temperature before using it (e.g. after a cold night
in a car) to avoid condensation forming on the device.
PODIAVAC is not suitable for use in wet areas (such as the bathroom)
(see technical data).
If a liquid or any particles reach into the inner of the device, it should be switched off immediately and
disconnected from the power supply. Check by an authorized dealer before continuing the use of the
device.
Keep the device out of the reach of children and unauthorized persons!
Attention !
Always pull the mains plug before cleaning the device or replacing the fuse! Never
operate the device without a grinder. If you are not working with the hand-piece, always insert a blind
pin. Only use grinders with a maximum diameter of 6 mm. Take the manufacturer’s specifications
regarding the maximum speed into account. Only insert dry grinders into the hand-piece.
Never place the hand-piece in a liquid, otherwise irreparable damage might be caused for which the
manufacturer accepts no liability!
Attention !
Never operate the device without a dust bag.
