10
To maintain the NSK K1
TM
Seal’s high efficiency over a long period of time, please
follow these instructions.
K1
TM
Handling Instructions
1.
Max. operating temperature: 50°C (122°F)
Max. peak temperature: 80°C (176°F)
If not installed immediately, they should be kept refrigerated.
Avoid storage in direct sunlight.
2.
Never leave the linear guide in close proximity to grease-removing organic
solvents such as hexane, thinners, etc. Never immerse the linear guide in
kerosene or rust preventative oils which contain kerosene.
Note
Other oils such as: water-based cutting oil, oil-based cutting oil, grease (mineral oil-AS2, ester-PS2)
present no problems to the K1
TM
lubricating units performance.
NSK K1
TM
Rail
Ball Slide
End (rubber) Seal
End (rubber) Seal
