Page 8
USE INSTRUCTIONS
Before Using the Seam Phantom
®
Before using the assembled Seam Phantom® be sure to complete the following preparations.
Supply the Specified Voltage (electric version)
Supply the voltage specified on the nameplate of the grinder. Otherwise damage could result to the
machine, or increase the risk of personal injury.
Install a Ground Fault Circuit Interrupter (GFCI) (electric version)
To prevent electrical shocks, be sure that the power circuit being used is protected by a GFCI device
or be sure to install the supplied ground fault circuit interrupter (GFCI) between the main power
supply and the cord of the machine.
Keep Water Out of the Grinder (electric version)
Do not let water into the motor of the electric grinder. Water inside the machine will weaken the
electrical insulation of the motor and may result in electric shock. Ensure the spray skirt (see Figure
4 to 7) and splash guard angle (see Figure 3) are installed at all times during use.
Organize the Work Area for Safe Operation
Before beginning operations, make sure that the work area conditions are well organized for safe
operation of the Seam Phantom®
Use Proper Safety Gear
To prevent damage to eyes from flying debris, wear protective glasses or face shield. Be sure to
wear waterproof safety boots, appropriate hearing protection and dust protection as required.
!
!
!
!
!
Summary of Contents for 0010-1
Page 14: ...Page 14 FIGURE 6 Cleaning...
