TIGHTENING TORQUE
Correct tightening forces on fasteners, nuts, bolts, screws on your bicycle are crucial. Too little force,
and the fastener may not hold securely. Too much force, and the fastener can strip threads, stretch,
deform or break. Either way, incorrect tightening force can result in component failure, which can cause
you to loose control and fall. If in any doubt, or if any problems are found during the pre-ride check you
should immediately seek professional advice from a professional bicycle mechanic.
Study the manuals of the suppliers of the suspension fork, rear shock, and other parts that come with
this frame. Do not ride the bicycle until all problems have been resolved. Riding a bicycle with any defects
can be a hazard to your health and life! Unless you are a very competent bicycle mechanic, do not
attempt to execute any of these adjustments yourself. Seek advice at your local bicycle shop. The rear
suspension bolts (rear shock and pivots) have been tightened in the factory with specific torque. In
case of re-adjustment extreme care should be taken when re-tightening them.
Tightening torque for various bolts on the frame:
20Nm
20Nm
15Nm
15Nm
15Nm
15Nm
5Nm
For other components please first refer to manufacturer instructions.
15
S
T A
Y
Summary of Contents for DEFINE
Page 1: ...DEFINE TECH MANUAL...
Page 3: ......
