NRI Currenza F2, Operating Instructions Manual

Page: 30 / 51

30
O
PERATION
National Rejectors, Inc. GmbH, Buxtehude
To save with a wide acceptance band:
5b)
Set DIL switch S2.10 toward the
top to ON.
The acceptance band has been
widened.
Now you can set DIL switch S2.9
toward the bottom to OFF.
Successful saving is signalled by
the acceptance gate attracting once, an error when saving is indicated
by the acceptance gate attracting twice (brief clacking sounds), if, for
example, the acceptance band of the coins inserted and the
acceptance band of an already programmed coin channel overlap.
To abort the operation, first set the DIL switch of the respective coin
channel (here: S2.3) as well as DIL switch S2.10 and then DIL
switch S2.9 toward the bottom to OFF.
6
If necessary, set DIL switches S2.1–8 for the normal operating mode
(see section "Inhibiting coins/Activating narrow coin channel" in this
chapter).
The new coin type/token will now be accepted for payment by the coin
validator.
... using ccTalk commands/machine service menu
In order to generate new acceptance bands you can teach coin channels
using a ccTalk instruction set (see section "Teach mode" in Chap. 9
"Technical data"). Applying this instruction set (headers 202/201) the teach
mode can be started and monitored, e.g. via a service menu.
The new acceptance bands are generated and stored by inserting ten coins/
tokens of the new type. After having stored the acceptance bands the new
coin type/token will be accepted for payment by the coin validator.
For all further information on teaching coins/tokens using the service menu
please refer to the machine manual.
If you overwrite a coin channel in the teach mode which has
already been configured, you must adapt all features assigned
to this channel (e.g. coin ID, sorting, etc.) to the new coin/
token (see separate WinEMP manual).
S2
S2