INSTRUCTIONS
Global leader in wind measurement technology
110 Riggs Road
·
Hinesburg
·
VT 05461 USA
·
TEL (802) 482-2255
·
FAX (802) 482-2272
·
EMAIL [email protected]
SymphoniePLUS_Sensor_Connection_instructions.doc
Rev 4
31 March 2010
NRG Sensor Connections to Symphonie
PLUS
Introduction
These instructions will assist you in connecting standard NRG sensors to a Symphonie
PLUS
logger and also
provide the default slope and offset for each sensor type. These default values are preloaded in the
Symphonie
PLUS
logger (except for iPack voltmeter and RMY Vertical Prop Anemometer) and the Symphonie
Data Retriever (SDR) software. The values are included here as a quick reference only - please see the
Symphonie
PLUS
manual for logger channel configuration.
Connections
