EC DECLAR
ATION OF C
ONFORMIT
Y
AUTOMATIC ENTRANCE SOLUTIONS
The relevant technical documentation is compiled in accordance with the directive
2006/42/EC Annex VII and we undertake to transmit, in response to a reasoned request
by market surveillance authorities, this documentation in electronic form within a
reasonable period of time.
Person authorised to compile the relevant technical documentation:
NRG Automation, Foundry Lane, Widnes, Cheshire. WA8 8TZ
The machinery is incomplete and must not be put into service until the machinery into
which the partly completed machinery is to be incorporated has been declared in
conformity with the provisions of the Machinery Directive 2006/42/EC.
Place / Date
Widnes, 06/11/2015
Technical Manager
Andrew Perry
Position of signatory
Technical Manager
Automation of Blinds, Awnings, Garage Doors, Shutters & Gates
Registered in England & Wales No: 08762273
Andrew Perry
EC DECLARATION OF INCORPORATION
Manufacturer / Authorised Representative:
NRG Automation Limited, Foundry Lane, Widnes. WA8 8TZ
We declare that the product type described below:
Black Edition Garage Door Opener
are in conformity with the essential requirements of the Machinery Directive 2006/42/EC.
In addition, the partly completed machinery is in conformity with the Construction Products Directive
89/106/EC, the Electromagnetic Compatibility Directive 2004/108/EC and the Low Voltage Directive
2014/35/EC and R&TTE Directive 2014/53/EU
In accordance with the following harmonised standards:
EN
60335-2-95:2015
EN 60335-1:2012 (4
th
e A11:2014)
EN
6100-3-2:2014
EN
61000-3-3:2013
EN 62479:2010, EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-2:2009
+A1:2001+
A2:2008
EN 300 220-2 V2.4.1 (2012-05)
EN 300 220-1 V2.4.1 (2012-05)
EN 301 489-3 V1.6.1 (2013-08)
EN 301 489-1 V1.9.2 (2011-9)
As shown in test report number
NCT150503451E01,
NCT150503451E02,
NCT150503451E03,
NCT150503451E04
NCT150503451S1
