Dynamic Mode: - Only 1 button can be programmed this way
1.
Hold S button for 2 seconds, LED1 illuminates
2.
Press ONCE slowly the top or top left button on the transmitter, LED1
turns off and a beep is heard from the controller.
Open Mode:
1.
Hold S button for 2 seconds, LED1 illuminates
2.
Press S button again, LED 2 illuminates
3.
Press the button on your transmitter ONCE slowly LED2 turns off, beep
from controller
(this programmes the open button)
Courtesy Light:
Lights On and Off using a spare channel:
1.
Hold S button until LED 1 illuminates
2.
Then press 3 more times the S button, LED1, 2 & 3 illuminate
3.
Press the spare channel on the transmitter ONCE slowly, LED’s turn off,
beep from controller
Programming 2000 Cycles Counter Alarm
Programming Transmitters...cont’d
To exit programming mode, hold S button for 2 seconds, then press S button 4
times. Alternatively, leave for 10 seconds.
Programming Transmitters - Max 40
Programming ASK Function (Bi-di)
Close Mode:
1.
Hold S button for 2 seconds, LED1 illuminates
2.
Press S button ONCE , LED 3 illuminates
3.
Press the down button on your transmitter ONCE slowly LED 3 turns off,
beep from controller (this programmes the close button)
Ask Function:
1.
Hold S button until LED1 illuminates
2.
Then press S button 4 more times until LED’s 1 + 3 illumitae
3.
Now press ASK button of transmitter, LED’s turn OFF, controller beeps.
Activate & Deactivate ASK Function
1.
To activate - hold P and + buttons together until you hear ONE beep
2.
To deactivate - hold P and - buttons together until you hear TWO beeps
Testing ASK Function: When the door is closed and ASK in ‘active’ press the ASK button. The
transmitter LED should glow BLUE indicating a ‘closed’ door. A red LED indicates an ‘open’
door.