NRD USA
/ 2937 Alt Boulevard / PO Box 310 / Grand Island, NY 14072-0310
PHONE
716 773 7634 /
FAX
716 773 7744 /
WEB
www.nrdllc.com
NRD Asia Pte. Ltd
/ 114 Lavender Street #08-90 CT Hub 2 Singapore 338729
PHONE
+65 6679 1707 /
WEB
www.nrdllc.com
3
INST2035 – 2/19
2.0 Accessories
Accessories such as blowers and air amplifiers are designed to be used with the P-2035 air
ionizer to move air or nitrogen through the ionizer. The air becomes ionized and is directed to
the charged surface, thereby neutralizing it.
2.1 Air Amplifier Model 4165
Usage
The Air Amplifier provides an adjustable mounting bracket to be used with the P-2035 in
conjunction with a source of compressed gas. The amplifier conserves compressor power by
“amplifying” the compressed supply by as much as 13 times. This is accomplished by entraining
surrounding air through the ionizer, providing very efficient ionization.
Assembly Procedure
A.
Attach the female hose connector to the 1/4” NPT air inlet fitting. Secure the hose
using a 3/4” open end wrench.
B.
Place the adapter ring into the recessed end of the Ion Cell. Ensure that the bottom
of the ring rests on the inside shoulder of the Ion Cell.
C.
Engage the three thumbscrews into the threaded holes in the cell. Do not tighten the
screws.
D.
Orient the air flow amplifier such that the cylinder is horizontal and the air hose
connection is below the cylinder.
E.
Insert the cell with adapter ring over the cylinder of the air flow amplifier. Engage it
as far as it will go.
F.
Secure the cell to the amplifier by tightening the three thumbscrews.
G.
If the Model 4065 Air Amplifier is used, remove the dust cap from the free end of
the air hose. Attach the hose connector to the 1/4” NPT female outlet port of the
filter. Secure the hose using a 3/4” open end wrench.
Maintenance
To ensure maximum static removal efficiency, the cell must be replaced annually
regardless
of usage. The replacement date is 12 months after the date of manufacture.
Calibration is not required.
Model 4165 Air Amplifier
shown with P-2035. A 6’
pressure hose is also included
(not shown).
