background image

1  |  minnkotamotors.com

©2018 Johnson Outdoors Marine Electronics, Inc.

TALON SETUP & PAIRING

FOR BLUETOOTH® ENABLED TALONS

Up Button

Down Button

Indicator Panel

Pairing a Device with a Single Talon

a.  On the device you intend to pair with the Talon, turn 

Bluetooth “on”, and keep your device on that screen.

b.  Retract the anchor on the Talon by pressing the Up 

 button on the Indicator Panel. 

c.  Once the Talon is fully retracted, press and hold 

the Up 

 button and the Down 

 button 

simultaneously on the Indicator Panel. The Depth 
Indication LEDs will begin to fl ash blue. Once 
the LEDs are fl ashing, release the buttons on the 
Indicator Panel. The Talon will go into Pairing Mode 
for 30 seconds.

f.  In order for the device and your Talon to stay 

connected, Bluetooth needs to remain "on". Once 
the device is paired with the Talon, the device 
will connect and begin communicating with each 
other.  When the Talon is paired to the device 
and communicating with it, the Talon app will 
automatically recognize that the Talon is paired.  

g.  If the pair is unsuccessful, repeat the process.

The Talon app can be used to control the Talon using a device 
that is paired to the Talon with a Bluetooth connection. Before 
pairing the device with the Talon, the Talon app should fi rst 
be successfully downloaded. You can confi rm that the app was 
successfully downloaded by opening it on your device. Once confi rmed, close the app to begin the pairing process.

NOTICE: 

When a device is paired with the Talon, 

the paired device and Talon know each other. When 
a paired device and a Talon are connected they can 
actively communicate with each other.  In order for the 
Talon App to detect the Talon, it needs to be paired and 
communicating with the Talon.

NOTICE: 

When the device Bluetooth is scanning for the 

Talon, the Talon must be in Pairing Mode.  If the Talon or 
the device time out, the process on both will need to be 
re-initiated.  

NOTICE: 

Your device will only be able to connect to a 

Talon and be paired if the device Bluetooth is enabled. 
Your device will only be able to pair with a Bluetooth 
enabled Talon.

1

2

3

d.  If on an Android device select the Scan button to 

begin the process on your device. On an iOS device, 
as soon as the Bluetooth menu is opened, the scan 
starts automatically. The Talon will appear on the 
list of available devices once it is recognized by the 
device. 

e.  Select the Talon from the list of available devices. 

This will pair the Talon to the device. Once you hear 
the beeps, the Talon is successfully paired.

Android

iOS

Pairing a Device with Two Talons

In order for the Talon App to pair two Talon's to the device, the Talons fi rst need to be paired together.  To learn how to pair two Talons 
together, read the " Pairing Two Talons and Programming the Mounting Location" section of the Talon Manual.  Once the Talons are 
paired together, follow the directions for "Pairing a Device with a Single Talon". Only one Talon needs to be paired with the device where 
the Talon app is installed. 

Reviews: