NRD Staticmaster 6405, Installation Operation & Maintenance

Page: 3 / 4

NRD USA / 2937 Alt Boulevard / PO Box 310 / Grand Island, NY 14072-0310
PHONE 716 773 7634 / FAX 716 773 7744 / EMAIL sales@nrdllc.com / WEB www.nrdllc.com
NRD Asia Pte. Ltd / 114 Lavender Street #08‐90 CT Hub 2 Singapore 338729
PHONE +65 6679 1707 / EMAIL sales@NRDasia.com / WEB www.nrdllc.com
- 3 -
INST6405_01/19
2. Installation
Warranty Note: failure to use clean, dry, filtered,
compressed air will VOID warranty.

Connect supplied AC power adaptor wire to
the power connection on the Ionizing Air
Gun.

Connect air hose, 6mm outside diameter, to
the air inlet of the Ionizing Air Gun.

Plug AC power adaptor into a AC outlet.

Connect air hose to a clean, dry, and filtered
compressed air supply.
3. Operation

Open air supply valve and adjust to desired
pressure, 35 psig is recommended. (80 psig
maximum)

Put the ON/OFF switch in the ON position.

Point the Ionizing Air Gun at the target to have the
static charge removed.

Depress the airflow/power control lever to begin
airflow and activate the Ionizing Air Gun. The green
power LED will be lit to verify that the ionizer is
activated.
4. Alarm LED (red LED)
The red LED indicates that the ionizer is operating in
abnormal condition. Possible causes are:

Metal cap is loose.

Emitter point needs to be cleaned.

High-voltage output is insufficient.