Safe
Do not operate the unit in the same compartment as
batteries or in any compartment capable of storing
flammable liquids like gasoline.
Clean
Do not operate the unit in an area that is prone to dirt, dust
or debris. Especially important if used in a work
environment.
Your Digital Power Inverter supplies 3000 W of max continuous power with
5000 W of surge power. When you turn on an appliance or a tool that operates
using a motor or tubes, it requires an initial surge of power to start up. This
surge of power is referred to as the “starting load” or “peak load”. Once started,
the tool or appliance requires less power to continue to operate. This is referred
to as the “continuous load” in terms of power requirements. You will need to
determine how much power your tool or appliance requires to start up and its
continued running power requirements.
The inverter should be connected to your vehicle’s 12 V power supply with the
DC cables. We recommend that the equipment or appliance switch be in the
“OFF” position prior to plugging into the AC receptacle of the inverter.
Warning
！
Shock hazard! Keep away from children!
Please be sure to remove metal jewelry, such as rings, bracelets and watches
etc. to avoid accidents!
Connecting the inverter:
1) Place the inverter on a flat surface, such as on the vehicle floor.
2) Please make sure that the inverter is shut down.
3) Attach the ring type connector marked with red to the positive (+) DC
terminal on the power inverter, and attach the ring connector marked
with black to the negative (-) DC terminal.
8.