6.
5. Installation
1. Digital Readout
—it indicates the power and DC voltages. The allowed
power tolerance is 15% (with loads of over 200W), and the allowed voltage
tolerance is +/-0.2V (no load).
2. Button Power Switch
— Connect the inverter to the DC power and press
down the button power switch, the AC power is available.
3. Port for Remote Control
— Connect the remote control switch and press
down the switch, the remote control function acts.(remote control switch is not
included.)
4. USB Port— Offer 5V power to USB equipment.
5. AC Outlets— They allow you to plug in 110V AC products with a total
continuous of 1500W or less.
6. Green LED Indicator— Indicates the digital display is showing DC input
voltage.
7. Yellow LED Indicator — When the power exceeds 1000W, the yellow LED
indicator lights, and the digigal display showing output power loads in kilowatts.
8. Red LED Indicator— Indicates that the consumption of the loads is under
1000 W, and the digigal display showing output power loads in watts.
9. Positive DC terminal
— Connect the red end of the DC power cord to it.
10. Negative DC terminal
— Connect the black end of the DC power cord to it.
11. Cooling Fan and Ventilation Openings
— The high speed cooling fan
protects the inverter from over-heating. And the ventilation openings should be
kept clear!
The unit must be operated in an area that meets the following requirements in
order to operate safely and provide optimum performance:
Dry
Don’t allow water or other liquids to drop or splash on the unit.
Description