TA600008-EN0/1
- 1 -
1. Preface
Thank you for considering our Application Software 2 "Motion Patterns Builder" for PCL6115-EV Starter Kit.
This manual describes specifications, functions of our Application Software 2 "Motion Patterns Builder" for PCL6115-EV
Starter Kit and how to connect and use it.
In order to use this product safely, please read this manual thoroughly and keep it.
1.1 Cautions about this manual
Please consider contents of this section when handling this manual.
1)
Copying all or any part of this manual without written approval is prohibited by copyright lows.
2)
The specifications of these LSIs may be changed to improve performance or quality without prior notice.
3)
Although this manual was produced with the utmost care, if you find any points that are unclear, wrong or have
inadequate descriptions, please let us know.
1.2 Production warranty
1.2.1 Warranty period
The warranty period is one year from the data of the delivery to an assigned place.
1.2.2 Warranty scope
If defects are found in the product during the warranty period under normal use defined used only in method set forth in this
manual, NPM will repair the product without charge or replace it with a new one at the direction of NPM.
The following cases are not covered by the warranty even during warranty period.
1)
The products are modified or repaired by anyone other than NPM or a person authorized by NPM.
2)
The defect results from dropping of the product after delivery or mishandling in transit.
3)
Wearing of components, natural deterioration or fatigue
4)
Causes arising from usage other than those described in this document.
5)
The product has been subjected to natural disaster or force majeure such as fire, earthquake, lightning strike, wind,
flood, salt, electrical surges, etc.
6)
The defects or damage results from a cause that is not the fault of NPM.
When the product is purchased from a supplier other than NPM, please contact that supplier regarding the product warranty.
NPM will not provide on-site repair. If the product is defective, the product must be returned to the specified location for
repair.
The warranty period of the repaired product is the same as the warranty period before the repair.
This warranty does not cover damages caused by product malfunction or damage to the product itself.
