manualshive.com logo in svg

NPK Genesis GHG 16, Safety & Operator Manual

The NPK Genesis GHG 16 Safety & Operator Manual is available for free download on our website. This comprehensive manual provides essential information on operating the product safely and efficiently. Gain valuable insights and guidelines necessary for optimal performance. Visit manualshive.com to download your manual now.

Share
Download
background image

© 2022 Genesis Attachments, LLC

Genesis GHG 16 - GHG 50 Handling Grapple 49

CYLINDER TORQUE SPECIFICATIONS

Rod Nut and Piston Torques

The torques listed below are for the rod nut (c1) and piston (c2) used in the GHG cylinder 

assembly. When assembling during rebuild, it is also recommended that thread adhesive is used 

to ensure complete clamping.

Torque

ft. lbs.

Nm

Piston (c2)

1106

1500

Rod Nut (c1)

29.5

40

Apply a small amount of thread adhesive to the set screw (c6) before installing.

Summary of Contents for Genesis GHG 16
























































Reviews:

No comments

Related manuals for Genesis GHG 16

SUNWARD SWE155F Operation & Maintenance Manual preview
SWE155F
Brand: SUNWARD Pages: 188
SANY SY115C9 Safety, Operation And Manitenance Manual preview
SY115C9
Brand: SANY Pages: 445
New Holland E57C Operator'S Manual preview
E57C
Brand: New Holland Pages: 374
Volvo EC15C Product Manual preview
EC15C
Brand: Volvo Pages: 44
Volvo EC210B Manual preview
EC210B
Brand: Volvo Pages: 244

Brands by name

Popular brands

Load more brands