7
Section 3
2 Highlight the Side 1 fiber name (e.g. FIBER), then press CHANGE (F3).
3 Use the arrow keys (F1 & F2) and the SELECT (F3) key to enter characters. Use the MAIN MENU
key as a backspace. Press EXIT when finished.
OPTIONAL:
To make Side 2 fiber name different from Side 1 name highlight the Side 2 fiber name.
Press CHANGE (F3), then perform step 3 again.
to specify starting fiber numbers
The fiber numbers (Side 1 and Side 2) auto increment from the numbers displayed below the fiber
names. These numbers can be set to any value from 1 to 999.
NOTE:
If initial numbers are adjacent (e.g. 11 and 12, or 101 and 102), then they will auto increment
by 2. Otherwise numbers are auto incremented by 1.
EXAMPLE 1: Adjacent Fiber Numbers
Auto Test Side 1 Side 2
1
11
12
Set by user
2
13
14
Auto incremented by 2
3
15
16
Auto incremented by 2
EXAMPLE 2: Non-Adjacent Fiber Numbers
Auto Test Side 1 Side 2
1
200
300
Set by user
2
201
301
Auto incremented by 1
3
202
302
Auto incremented by 1
1 From the AUTO TEST screen press SETUP (F1).
2 Highlight the Side 1 fiber number, then press the + (F2) key to increment, or the - (F1) key to
decrement both fiber numbers. Hold either key for fast adjustment.
Side 1
Side 2
