P
ow
er
C
H
G
N
C
V
S
C
A
N
N
F-
86
01
S
E
T
R
E
C
E
IV
E
R
Cable Length T
ester
Receiver
Remote identifier
C
H
G
05
06
Your excellent helper in cable test!
Your excellent helper in cable test!
MICRO: Charging for battery.
Portson Receiver
Function keys on Receiver
is to detect currency and also lighting lamp. “SET” is for voltage
detector and cable tracing. Press to adjust the sensitivity. Press to
turn on or turn off the device.
(1)Port RJ45: remote testing cable continuity for Lan cable.
(2)Port RJ11: remote testing cable continuity for telephone cable.
(3)Port BNC: remote testing cable continuity for COAX cable.
Portson Remote identifier
Instruction on Main interface
Here are six main functions on Main interface.
(1).Wire mapping --- Test cable continuity, such as the cable is good, open,
short, cross, reverse connection, ect.
(2).Scan cable---to find targeted cable among lots of network cables,
telephone cables, USB cables and coaxial cables, also tracing short
position of cable.
(3).PING---to test network signals and the network cable is connected or not.
(4).Cable Length---Pairing and length measurement: verify cable length,
open circuit distance and pairing, crosstalk.
(5).PoE---to test if a network cable is connected with PoE switcher or PoE
Router, and then detect the power of every cable.
(6).Setting---to set up language/ Lighting/ lighting time/ auto-off time/ theme/
system information (version No.),ect.
Charging function
The power supply for main tester and receiver are both 3.7V Rechargeable
battery, its capacity is 1800mAh. When finish charging, the main tester can
work continuously for over 20hs, receiver can work for over 50hs. The
rechargeable battery avoids the trouble of replacing 9V battery again and
again. The whole standard charging devices are included. After charging,
please disconnect the charging device, otherwise it would shorten the
battery life.
N
F-
86
01
W
IR
E
M
A
P
Wire M
apping
Scan C
able
Set
P i n g
Menu
POE
Test
Cable L
ength