08
09
4. Other functions
3) Sensitivity adjustment function
Turn the sensitivity adjustment knob on the receiver when tracing cable to
adjust the value to be the appropriate degree
.
(1) Low-voltage hint function
When the battery is low (
≤
6V), push the function button to “scan” or “test” ,
at this time, both the scan indicator and wire sorting indicator will flash, which
means the battery should be replaced.
(2)
Earphone function
The earphone can be worn in noisy environment for operation so as to avoid
external interference.
(4) Floodlight function
The side floodlight can be started at night or in dark. The floodlight turns
on so as to facilitate your normal operation.
(5) Wire sorting directly with switch
Connect the line to be tested with transmitter and switch,then get the result
from flashlights.
Your excellent helper in measuring instruments.
Your excellent helper in measuring instruments.
5. Specification
E
m
it
te
r
Tracing
VFL
(NF-168V)
Compatible cable
Max. signal voltage
Max valume
Tone frequency
Tone mode
Ordinary tracing
Anti-interference
Distance of transmission
Wave length
Power
Mode
Mapping
Battery Type
Battery low indicate
Voltage protection
Max. working current
Dimension(LxWxD)
Anti interference reception
Sensitivity adjust
Ordinary Huting
Earjack
LED lighting
Battery Type
Power indicate
Battery low indicate
Max. working current
Dimension(LxWxD)
RJ45, RJ11, BNC cable
8±1.0Vp-p
105dB
455Hz
1 Tone
YES
YES
RJ45 300M non-load/load
650nm
5mW
Constant ight mode, Blinking mode
Fast, slow, manual
DC9.0V(6F22 DC9V x 1pcs)
6.0V±0.5V
DC 60V
Less than 100mA
146*57*30mm
YES
YES
YES
YES
DC9.0V(6F22 DC9V x 1pcs)
LED Power indicator
6.0V±0.5V
≤
150mA
187*46*27mm
R
e
c
e
iv
e
r
YES
