track title and contact details. If no information is available, just the frequency is
shown. Stereo broadcasts are indicated with an icon at the top of the screen, To view
further information about the broadcast, press
INFO
.
Each time you press
INFO
, another set of information is displayed, cycling through
RDS text, further RDS text (station/programme type), frequency and today’s date.
5.8.3
Settings
•
Scan settings
By default, FM scans stop at any available station. This may result in a poor
signal
-
to
-
noise ratio (hiss) from weak stations. To change the scan settings
to stop only at stations with good signal strength, select Yes after choosing
Strong station only?
•
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may
result in a poor signal
-
to
-
noise ratio (hiss). To play weak stations in mono,
select FM weak reception: Listen in mono only and then YES.
5.9
Bluetooth
When you select the Bluetooth mode, the device is entering to pairing and the BT icon at the
bottom of the screen will flash. Turn on your smartphone, tablet or other Bluetooth devices to
search for the device. The Bluetooth pairing name is “A120+”. When pairing is successful, the
Bluetooth indicator will light up and stop flashing.
To release the Bluetooth pairing, press and hold
on the remote control.
Press
on the remote control to play or pause the music. You can also press
or
on the remote control to play the previous or next track.
