automatically performs a full scan to see what stations are available. You may also
need to start a scan manually to update the list of stations for one of the following
reasons:
o
Available stations change from time to time.
o
If reception was not good for the original scan, this may result in an empty or
incomplete list of available stations.
o
If you have poor reception of some stations (burbling), you may wish to list
only stations with good signal strength.
To start a scan manually, choose Full scan. To scan only stations with good signal
strength, select Local scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but not unavailable, choose Prune invalid.
Turn the navigate reel to view a list of stations and press to select. Once selected, the
station plays and the screen shows information about station, track or show as
broadcast.
5.7.2
Presets
To store a DAB+ preset, press and hold
on the remote control until the display
shows the Save preset screen. Select one of the 10 presets to save the
current
station
.
To select a preset, press
briefly, then select one of the listed preset stations.
When a preset station is playing, it shows
n
(
1,
2 etc) at the bottom right of
the screen.
“1” to “0” on the remote control are for the use of preset station 1
-
10.
5.7.3
Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label
Segment) information broadcast by the station giving real
-
time information such as
programme name, track title and contact details. Stereo broadcasts are indicated
with an icon at the top of the screen. To view further information, press
INFO
.
Each time you press
INFO
, another set of information is displayed, cycling through
DLS text, programme type, ensemble name/frequency, signal strength/error rate, bite
