Nox C1 US Manual
~ 23 ~
COMPATIBLE DEVICES, SENSORS AND ACCESSORIES
Warning: Do not use damaged equipment, sensors, or accessories. This may
result in bad performance of the device or patient/operator injury.
Warning: External equipment and all auxiliary devices intended for
connection to signal input, signal output or other connectors shall comply
with the relevant product safety standards, e.g. IEC 60950-1 for IT
equipment and the IEC 60601 series for medical electrical equipment, to
prevent electric shocks. In addition, all such combinations – systems – shall
comply with the safety requirements stated in the general standard IEC
60601-1, edition 3/3.1, clause 16. Any equipment not complying with the
leakage current requirements in IEC 60601-1 shall be kept outside the
patient environment i.e. at least 1.5 m from the patient support. Any
person who connects external equipment to signal input, signal output or
other connectors has formed a system and is therefore responsible for the
system to comply with the requirements. If in doubt, contact a qualified
medical technician or your local representative.
Caution: After connecting a new auxiliary signal to the Nox C1 Access Point
connectors OR after modifying the connection of the auxiliary signals OR
after changing the mode of the auxiliary devices signal output, always verify
the correct setup by performing an actual recording, making the auxiliary
device create a known signal, and monitoring the appearance and values
measured in the recording software, in order to prevent signals that would
lead to incorrect interpretation and possible incorrect treatment.
Warning: All the auxiliary devices connected to the Nox C1 Access Point
should be powered from a single power strip to ensure a common ground,
avoid ground potential difference skewing or disturbing the signals and thus
prevent possible incorrect treatment.
The following table includes information on accessories, sensors and devices that have been
validated with the Nox C1 Access Point.
The items listed below are Nox products and have been validated for use with the Nox C1 Access
Point:
NOX FILTER TUBE CONNECTORS
Type
Catalog Number
Nox Filter Tube Connector, 50 units
552110
NOX SLEEP SYSTEM COMPONENTS
Type
Catalog Number
Nox A1 System Kit
513510
Nox A1 Recorder
561120