Nowsonic autark id07, User Manual

Page: 9 / 76

9
Nowsonic Autark ID07
User manual
GB
www.nowsonic.com
Outlets and controls on the rear panel
The following outlets and controls are available on the back panel of
Autark ID07:
1. Mains sockets / fuse
Here you connect the supplied IEC power cable. Using the IEC outlet
you can daisy-chain the mains to following devices. In addition, you
can replace the internal fuse here in case it should be blown due to
overload: use in every case a replacement fuse with identical specifi-
cations.
2. Menu and operating buttons
Autark ID07 is locally controlled via the buttons underneath the LED
display. Navigating the uppermost menu level is done via the
MENU
button and the

and

buttons. For navigating the sub menu level,
press the
ENTER
button and again the

and  buttons. Press the
ENTER button in order to open a menu item or to confirm your entry.
Press again the
ENTER
or
MENU
button, to exit a sub menu.
3. WIRELESS SWITCH
This button activates the internal receiver of Autark ID07. In the I
position, Autark ID07 can be controlled either via the supplied remote
control or via a wireless DMX transmitter: the address for the internal
DMX
receiver is entered via the menu.
8888
1
2
3 4 5
6
7
8
9