Nowsonic autark id07, User Manual

Page: 13 / 76

13
Nowsonic Autark ID07
User manual
GB
www.nowsonic.com
Operation with battery
Autark ID07 integrates a battery pack that is automatically charged
when connected to the mains. The battery pack allows for a battery-
backed operation for up to 10 hours. To operate Autark ID07 with
batteries, just pull the mains plug before powering the unit: after
powering up, the current charging status of the battery pack is shown
via the LEDs of the battery indicator.
In case of a malfunction, you can access and exchange the internal
battery pack via service cover on the back panel. Please contact first
the dealer from whom you have purchased the device.
Operation via the menu
You can operate Autark ID07 either via the menu display on the back
panel or via the supplied remote control.
For menu operation proceed as follows:
d d
Select the desired menu item by repeatedly pressing the MENU
button. Alternatively, press the MENU button once and select the
desired menu item via the
dd
and dd buttons.
d d
Open the selected menu by pressing the ENTER button: the
current setting flashes in the display and can now be modified.
d d
Finally, the display returns to the previously selected menu item.
In order to adapt the settings, proceed as follows:
Entering the
DMX
address
d d
Using the

and

buttons, select the desired
DMX
address (
A001
to
A512
).
d d
Confirm your entry by pressing the ENTER button.
Choosing the Auto mode
d d
Using the

and

buttons, select the internal program
(
At01
to
At20
) or the
m 1 A5t
status (Master).
d d
Confirm your entry by pressing the ENTER button.
Entering the speed for Auto mode
d d
Using the

and

buttons, enter the desired speed
(
SP00
= off,
SP01
= maximum,
SP31
= minimum).
d d
Confirm your entry by pressing the ENTER button.
Choosing Slave mode
d d
Using the

and

buttons, select the
SLA
entry to
operate the Autark
ID07
in Slave mode with another
Master device.
d d
Confirm your entry by pressing the ENTER button.
Choosing the DMX
channel mode
d d
Using the

and

, select the desired DMX channel
mode. The (K1 , (K2 , (K6 and (K9 options are available.
For more information about the DMX channels read from
page 9.
d d
Confirm your entry by pressing the
ENTER
button.
SPED
SP00
SP31
1
2
6
9
AST