above-described scenario, instead please
install the Headrest Sensor
within the reach of the
User that can act as an emergency stop as well. For more instructions, see the “Headrest and
Headrest Sensor” section.
Please make sure that your R-Net configuration meets the following criteria:
• The correct SID port is configured as proportional.
• Sleep 12V parameter is set.
• User control is set.
• Drive, Acceleration and Deceleration settings are at a comfortable and safe level.
To avoid control problems when changing your seating position, we recommend
modifying your setting in the Omni to allow control of the actuators only when the head
is tilted either to the left or right side.
Setting up the IOM and the GyroSet Link
Setting up the IOM with the GyroSet Link should only be conducted by the distributor or a PGDT
trained person.
Setting up the Dynamic Controls Linx DLX-IN500 and the GyroSet Link
Setting up the Dynamic Controls Linx DLX-IN500 with the GyroSet Link should only be
conducted by the distributor or a Dynamic Controls trained person.
Setting up the Quantum Rehab Q-Logic 3 EX Enhanced Display or SCIM
Module and the GyroSet Link
Setting up the Quantum Q-Logic 3 EX Enhanced Display or SCIM Module with the GyroSet Link
should only be conducted by the distributor or a Q-Logic trained person.
Setting up the Vigo
The GyroSet Vigo was paired to your system at the factory.
Pairing to your phone (optional: to receive calls and listen to auditory type
entertainment)
1. In the mobile phone Settings, turn on Bluetooth. (iOS and Android: Settings > Bluetooth
> On)
Summary of Contents for GyroSet Cubo
Page 9: ......
