Novy 6830/16 Operating And Installation Instructions Download Page 4

EN 15

GENERAL INFORMATION

General
These are the mounting instructions for the Novy unit shown on the cover. The user manual is delivered separately with 
this unit. Carefully read these instructions before installing and commissioning this unit. It is recommended to have one 
or more qualified persons carry out the installation.

This manual makes use of a number of symbols. The meaning of these symbols are given below.
 

Symbol

Meaning

Action

Indication

Explanation of an indication on the 
hood

Warning 

This symbol indicates an important tip 
or a dangerous situation.

Safety
Observe the following mounting and safety tips for mounting:
•  The installation and electrical connection of the unit shall be carried out by an authorised expert. 
•  The manufacturer does not accept any responsibility for any damage resulting from faulty building in or connection.
•  Carefully take the unit from the packaging and check it for damage before mounting. 
•  Do not mount the unit in case of any damage.
•  Check if all mounting materials have been supplied using the drawings at page 2.
•  The unit is intended for household use only (preparation of food) excluding any other domestic, commercial or in-

dustrial use.

•  Safety can only be guaranteed if the unit is connected to an earth wire in accordance with the required regulations.
•  Do not use an extension cord for connecting to the electricity grid.
•  Replace defective or damaged parts only with original Novy parts.
•  Replace a damaged power cable with an original Novy power cable.

Important before mounting
Page 2 of these mounting instructions show the mounting drawings. Observe the following mounting tips before starting
the mounting activities:
•  For easier mounting of the ceiling unit, it is recommended to do this with at least 2 persons.
•  Make sure that the ceiling has sufficient load bearing capacity.
•  Position the wall socket in such a way that it is behind the ceiling unit.

Exhaust or recirculation
Before starting any mounting activities, you must have made the choice if you are going to make an exhaust duct to the 
outside or if you are going to use the hood as a recirculation hood. In case of an exhaust duct to the outside, carefully 
read the section in these mounting instructions for installing the exhaust duct. If you choose for recirculation, Novy offers 
the exhaust box (see accessories).

InTouch
InTouch offers the option to control the Novy cooker hood from the Novy InTouch induction hotplate. The ceiling unit 
may, as a default, be combined with InTouch induction hotplates. Visit the website for the different models of induction 
hotplates with InTouch
 

INSTALLATION

Proceed following the mounting drawings on page 2 and 3.

1

  Make a build-in opening:

 

Type 6830 / 6831 – Cut-away 845mm x 485mm.

 

Type 6840 / 6841 – Cut-away 1145mm x 485mm.

  The ceiling unit can be built into plates with a thickness of 18-35mm. Do not mount directly into gypsum board; 

always make sure there is reinforcement for the tightening of the mounting clamps. Make sure there is a socket 
near the ceiling unit, so that the power may, at all times, be removed from the ceiling unit.

  In view of the substantial own weight of the hood, the ceiling must have sufficient load bearing capacity.

  The recommended mounting height for an electrical or ceramic cooking plate is min. 600 mm and max. 16000 mm. 

 

The mounting height for a gas or induction cooking plate is min. 650 mm and max. 1600 mm.

Reviews: